Box and Lock Design (Beta)


"Box and Lock Design (Beta)"

Final designs for mounting drawing board frame to wall.
Pen, Pencil, Sketchbook
April 2007

These are almost the final designs for the 'box' and 'lock' mounting system.

Also shown is construction order. The two horizontal 'seats' for the lock, are joined by the horizontal bar (shown top right). The seat is then screwed onto the wall plate from behind, before the box is fixed to the wall.

The 'T' shape of the lock is constructed first and then is screwed to the lock back plate.

DISCLAIMER: The opinions and attitudes of James W. Morris as expressed here in the past may or may not accurately reflect the opinions and attitudes of James W. Morris at present, moreover, they may never have.


this page last updated:29th April 2013 (C) 2003 - 2017 James W. Morris

script time:0.0250