wcnt-1.26.2 Released!

wcnt-1.26.2

https://sourceforge.net/project/showfiles.php?group_id=76646&package_id=256925
http://wcnt.sourceforge.net

(source code only)

Second release of wcnt-1.26 after the pre releases...

* rudimentary polyphony
    no, no polyphonic sequencer.... but several new modules
    (wcnt-1.26.1) to create polyphonic effects:

        trig_counter  - counts and (?restricts) outputs input trigger
        trig_echo     - echos input trigger n times
        trig_router   - sends trigger n to auto-created output modules
        group_control - only runs modules when appropriate -
                        but easy to make it in-appropriate.

* fader (module)
    created to make easy a fade in and fade out at the start and
    end of the file to be written. uses either the time_map or
    timer (out_bar_trig/out_trig and out_bar/out_count) outputs
    and start and end bar parameters and extends the end by
    fade_out_time milliseconds.

* sample_climb (module)
    like sample_hold, but uses the grabbed 'sample' as a target
    to climb to ( output += (target - output) * rate ).

* inspector (wcnt-1.26.1)
    arkward to use module for displaying messages and values of
    outputs/inputs.

wcnt now has over 80 modules...(81 to be precise)

CHANGES:
    * wavfile_out (module) (wcnt-1.26.1)
      now has snapshot_mode parameter. adds date and time (down
      to the millisecond) to the filename being written. now you
      can edit a .wc file to your hearts content without overwriting
      the sounds generated.

    * square_wave (module) (wcnt-1.26.1)
      has rate parameter for adding curvature to the square_wave.
      works with same method as sample_climb.

    * user_wave (module) (wcnt-1.26.1)
      vertices which (via modulation) collide with previous vertices
      will be dropped from the waveform - as opposed to causing
      nasty peaks.

    * removed restrictions of combiner, spreader, and switcher to
      only allow usage of wcnt_signals. these modules can now use
      any module which provides the out_output output.

    * removed restriction of mixer module to only allow use of
      mix_chan modules. the mixer can now use any module which
      provides out_left and out_right outputs.

    * removed restriction of trig_switcher module to only allow
      use of wcnt_trigger module. trig_switcher can now use any
      module which provides the out_trig output (ie most of the
      trigger modules).

RE-CODED:
    * (wcnt-1.26.1) many things which should not make any difference
      to the user, except maybe a marginal speed increase in some
      situations.

    * many more things, (synthmod changes for a start).

FIXES:
    * dynamic module was checking for existence of wrong vertex.

-------------

NOTES:
    * tested it as much i can by myself and without any strict
      regime. i will have missed something...

    * documentation is very much out of date now, sorry. the only
      thing I can offer right now is the occasional comment in the
      examples, and tests (directories of .wc files bundled with
      source code).

    * another version might pop-along next week perhaps.

-------------

http://wcnt.sourceforge.net
https://sourceforge.net/project/showfiles.php?group_id=76646&package_id=256925

(source code only)

wcnt-1.26.2

regards,
james jwm-art net
  

Information

"wcnt-1.26.2 Released!"

wcnt-1.26.2 marketing

Journal entry - 00:28 Tuesday 5 February 2008

DISCLAIMER: The opinions and attitudes of James W. Morris as expressed here in the past may or may not accurately reflect the opinions and attitudes of James W. Morris at present, moreover, they may never have.

Comments

this page last updated:29th April 2013 jwm-art.net (C) 2003 - 2017 James W. Morris

script time:0.0533